Tuesday, February 22, 2011

Rewrap Different Ways to Make Wicker Leg

Consider doing the work themselves rather than spend money to pay someone professional to do repairs on the chair, when the old wicker chair collection that need improvement in your Rewrapping rattan furniture, it’s easy if you follow the correct procedures.

1. First, change your old patterns rattan chair wicker chair legs so. Clean the surface of the foot to remove dirt marks on the seat.

2. New rattan Soak in water for 2 to 12 hours, depending on the type you use rattan. This profound effect on the gap of time, but as a rule of thumb, you will find the cane is ready to be made teak furniture, if you bend the cane is as easy as a piece of string bending.

3. Rattan edge of the foot early, then apply hot water to the bottom edge of the seat frame. Amplifier provides a small nail with a wire provided with wicker repair kit.

4. Then you slowly begin to wrap the material around the foot wicker chair, and then you check and make sure the material taut and there is no gap where the wire terlihat.Use and nails on a regular basis to secure the foot. Check the instructions from your kit for the recommended distance between the wire nails so that you get the most out of mahogany wooden furniture.

5. Trim the excess from rattan, and secure the legs and attach it to the chair.

6. Let dry before painting wicker, seal or stain your wicker chair.

No comments:

Post a Comment